User Manual

4
Turning on/off the speaker
There is an on/off switch at the bottom of the speaker. You can turn on/off the speaker with this
switch. In order to save power, put the switch to off position when the speaker is not in use.
Pairing the speaker with Bluetooth devices (phone or music device)
Switch on the speaker, you can hear “Bluetooth model has been open” from Speaker
Place the speaker and Bluetooth device (phone or music device) so that they are no further
than 3 feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer
to the manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the speaker “NV-03304” from the list
of available Bluetooth devices.
If required, enter the password ‘0000’ to confirm & finalize pairing.
Once paired successfully, the blue LED flashes one times every one seconds, and you can
hear “Paired” from speaker. You can now start to use the speaker.
If pairing is unsuccessful, turn off the speaker first and then re-pair following the above steps.
Once you have paired the speaker with a device, the speaker will remember this device and
will pair automatically when the device’s Bluetooth is activated and in range. You do not need
to re-pair any previously connected devices.
The speaker will attempt to automatically connect to the last device it was paired with when
switched on. If you want to pair it with a new device please a long press on the MFB button and
you can hear “waiting for a Pair” from Speaker.
Once the speaker is paired with your device the music will transmit directly to the speaker.
Please refer to your device’s user manual for further information.
Function Summary
Listening to Music
Once the speakers are paired with your device you can stream music wirelessly through the
speaker. Select the track you wish to listen to and it will be streamed to your Bluetooth speaker.
Should you encounter any problems while streaming please refer your device’s user manual
for further information.
Control Function
If your Bluetooth device supports AVCRP (Audio/Video Remote Control Profile) you can use
the Bluetooth speakers to perform basic remote functions once paired while listening to music.
The functions in the below table may differ depending on your device. Please refer to your
device’s user manual for further information.