User's Manual
3
DescriptionofParts:
S.No. Description
1 SiliconLanyard
2 Speaker
3 ChargingPort
4 RubberFlap
5
LEDLight
6
MFPbutton(Power/Play/Pause)
INSTRUCTIONSFORUSE
Chargingthespeaker
Forbestresults,fullychargethespeakerbeforeitsfirstuse.
1. Connect the USB charging cord (included) to the DC 5V charging port of the
speakerandinserttheotherendintoaportonyourcomputerorsimilarpower
source.
2. Red LED glows indicating
that the battery is being charged. Once it is fully
charged, the Red LED will turn off. It takes about 2 hours to fully charge the
battery.
3. Oncethe speaker is fully recharged, disconnect the USB Cable and firmly close
theRubberFlap,tocovertheUSBChargingPortsecure.
IftheUSBchargingport
is not securely covered, water may seep into the electronics circuit and may
damagetheunit.ThisdamagewillNOTbecoveredunderproductwarranty.