FIREFLY Water Resistant Wireless Speaker with Color Changing LED Lights FFS‐12/0875 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY & RETAIN FOR FUTURE USE 1
Getting Started Remove the speaker from the box. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. Package Contents Water Resistant Wireless Speaker with Color Changing LED Lights USB charging cable Instruction manual Features 1. 2. 3. 4. 5. 6.
Description of Parts: S. No. 1 2 3 4 5 6 Description Silicon Lanyard Speaker Charging Port Rubber Flap LED Light MFP button (Power / Play / Pause) INSTRUCTIONS FOR USE Charging the speaker For best results, fully charge the speaker before its first use. 1. Connect the USB charging cord (included) to the DC 5V charging port of the speaker and insert the other end into a port on your computer or similar power source. 2. Red LED glows indicating that the battery is being charged.
Turn On/Off the Speaker Press and hold the MFP button (Power) for 2‐3 seconds until you hear the indication tone. Blue LED light will blink, your speaker is now ON and is entering “pairing” mode. Press and hold the MFP button (Power) for 2‐3 seconds to turn off the speaker. Turn the speaker to Bluetooth pairing mode ‐ 1. Press and hold the MFP button (Power) for 2‐3 seconds until you hear the indication tone. 2. Blue LED light will blink, your speaker is now ON and is entering “pairing” mode.
Color changing LED lights (LEDs are not replaceable) 1. Turn on the speaker. 2. Short press the MFP button twice to switch to Auto color changing mode. 3. Then, short press the MFP button twice each time to different light modes. The light modes include: Blue ‐> White ‐> Red ‐> Green ‐> Yellow ‐> Purple ‐> Cyan ‐> Auto color changing (slow) ‐> Auto color changing (fast). Tips!! When the unit is not in use, turn OFF the device to save the battery power.
FCC Instructions Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume for manufacturer any other liability in connection with the sale of our products. There shall be no claims for defects or failure under any theory of tort, contractor commercial law including but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of contract.
Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
