User Manual

You can use the 3.5mm cabled included in the kit to play music once your Bluetooth is turned off or
once the battery of the device is out of power. Connect one end of the 3.5 mm aux cable into the
Aux jack of the headset. The other end of the cable connects to the 3.5 mm jack of your mobile
phone / computer / audio devices.
(Note: Bluetooth mode should be turned off while using the AUX feature. Don’t connect Bluetooth
between your headset and your mobile phone when Aux is being used.)
MOBILE DEVICES SUPPORTED
In theory, it can support all equipments with Bluetooth®-enabled phone or music device that
supports Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile
(AVRCP). In order for Bluetooth® devices to communicate with one another properly, they must
utilize the same Bluetooth® profile. To determine the profiles supported by your device, please
refer to the device's user guide. Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth®-enabled devices, and/or the functionality of such features
may be limited in certain devices.
GUIDANCE ON SIMPLE TROUBLESHOOTING
Bluetooth
®
pair and connection fail
Other cell phone or equipment has been connected before connection, and has not left yet and
Bluetooth
®
cannot be switched off. When connection feature is employed again, the Bluetooth
®
unit
will automatically search for this Bluetooth
®
equipment for connection. First turn off the Bluetooth
®
feature of Bluetooth
®
equipment and the next Bluetooth equipment can search, pair and connect
normally.
The indicator lamp does not turn on and the Bluetooth
®
unit is not available
Bluetooth
®
unit has not operated for a long time, and may come into dormant state, then press the
MFB on the unit for a longer time to re-use it.
Low Bluetooth
®
volume
Check the volume level of your Bluetooth
®
device when playing the music and increase the volume
if needed.
Short Bluetooth
®
connection distance
There is a barrier between the cell phone and Bluetooth
®
headphone, please clear it away.
Bluetooth
®
may be normally connected and played, but sometimes, there is interrupted
1. There is a barrier between device phone and Bluetooth
®
headphone, please clear it away.
2. The distance between the Bluetooth
®
unit and connected device is too far away, out of normal
connection range. Please put them nearer.
SPECIFICATIONS
Bluetooth
®
specifications: 3.0+EDR
Working distance: up to 10 meters in open space
Supporting Profiles: HSP/HFP/A2DP and AVRCP Profiles
Built-in microphone for answering calls from mobile