User Manual

3
How to connect Bluetooth？
1. When plug in, the display screen will show “HI“ (as pic 1). After about 2 seconds, the entire Bluetooth
screen lights up, which indicates that the device is turn on.
Picture 1
2. The Bluetooth is in the state of automatic search when first plug in. At this time, the Bluetooth symbol will
always flashing. Using your smartphone , search and connect to “ Freedah Luxury”, Once connected, the
Bluetooth speaker will have a prompt tone. Meanwhile, the Bluetooth symbol on the display screen will change
from flashing state to light state (as pic 2).
Picture 2
3. When smartphone exits Bluetooth connection, the Bluetooth symbol will start flashing again. But when
exiting Bluetooth connection by using Bluetooth button , the Bluetooth symbol on the display will be
gray, accompanied by a prompt tone indicating that the Bluetooth connection has been exited. At the same
time, it will become USB playing mode (as pic 3).
Picture 3
How to correct calendar , time, week?
The time needs to be re-calibrated after the power is on to display the correct Month and calendar with the
exact time. Please see the detailed operation process as follows:
Step 1: Correct calendar ----Press the button for about one second, The number on month area will flash
on the screen firstly, Then select the button or to calibrate the month, finally press the button