User Manual

3.Operating instructions
A. Powering On/Off & Charging
1. Powering On
press and hold the “POWER” button for about 3 seconds to power on, The
blue LED light flashes.
2. Powering OFF
Press and hold the “POWER” button for about 3 seconds to turn off, The
red LED light is off.
3. When charging The red LED is always on, it will take 3 hours to be fully
charged, and the red LED light turns blue.
B.Pair between 2 Wayxin R9 intercoms
1. Powering on 2 intercoms(standby mode).
2. Device 1 long presses the A button to enter the red and blue lights to flash
quickly (pairing mode).
3. Device 2 long press the B button to enter the blue light to flash quickly(search
mode).
4. After waiting a few seconds, the 2 devices are paired successfully and the
blue light flashes at the same time(paired).
5. Press the pairing button (button A of device 1 or button B of device 2) again
to enter the intercom mode, and the red and blue lights flash at the same
time(intercom mode).
(Only A and B can be used for pairing, A and A, or B and B cannot be used)
C.Pair with Mobile phone/MP3/GPS
1. Press and hold the “POWER” button for about 5 seconds until the blue
and red lights flashes.
2. Activate the Bluetooth settings of the Mobile phone/MP3/GPS, search
for nearby bluetooth devices, and select "WAYXIN R9" to connect until
the connection is successful.