深圳市朋伴兴业科技有限公司 产品规格承认书 SPECIFICATIONS 客户: CUSTOMER: 产品名称: DESCRIPTION: Bipolar Bluetooth antenna 客户型号: CUSTOMER PART NO: 产品型号: PBX1608MA01 OUR MODEL NO: 日期: DATE: 2021/09/01 确认签字,盖章后请返回承认书一份 PLEASE RETURN TO US ONE COPY OF “SPECIFICATION FOR APPROVAL” WITH YOUR APPROVED SIGNATURES 核准 审核 刘飞 制作 刘小美 客户承认签印 日期 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.
深圳市朋伴兴业科技有限公司 PBX1608MA01 Specification Operating Temp. : -40℃~+85℃ 1. FEATURES: ● Light weight, compact ● Wide bandwidth, low cost ● Built-in antenna with high gain 2. APPLICATIONS: ● Bluetooth, Wireless LAN, Mobile TV ● Home RF System, etc 3. PRODUCT IDENTIFICATION C H I P 2 4 (1) 0 5 1 (2) 6 0 8 (3) (1) Product type: Multilayer chip Antenna (2) Center Frequency: 2450MHz (3) External Dimensions (L×W) (mm): 1.6*0.8 4. SHAPE AND DIMENSIONS: L 1.6±0.2 W 0.8±0.2 H 0.8±0.
深圳市朋伴兴业科技有限公司 ●天线位于 PCB 板内部或中间位置时（长条式耳机）： 单位：mm 天线最优放置于中间区域，净空区周围最优需要至少一排过孔。 ●天线位于 PCB 板边缘位置时（入耳式耳机和部分长条式耳机）： 天线最优放置于 PCBA 的边缘；天线及其走线设置在单层。 设计标准： 1. 图中的尺寸仅作为参考；实际尺寸会根据不同版型进行优化。 2. 净空区周围最优需要至少一排过孔，孔径 0.3mm，与 PCBA 上的其它回路或物料进行隔离。 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.
深圳市朋伴兴业科技有限公司 Electrical Characteristics Characteristic Curves UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES ＝± HOLEDIA＝± SCALE：N/A UNIT：mm DRAWN BY : Sera CHECKED BY: XD DESIGNED BY: Sera APPROVED BY: XD TITLE：CHIP2450-1608 Specification 深圳市朋伴兴业科技有限公司 THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 1608 SPEC REV.
深圳市朋伴兴业科技有限公司 Radiation Pattern UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES ＝± HOLEDIA＝± SCALE：N/A UNIT：mm DRAWN BY : Sera CHECKED BY: XD DESIGNED BY: Sera APPROVED BY: XD TITLE：CHIP2450-1608 Specification 深圳市朋伴兴业科技有限公司 THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 1608 SPEC REV.
深圳市朋伴兴业科技有限公司 3D Radiation Pattern UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES ＝± HOLEDIA＝± SCALE：N/A UNIT：mm DRAWN BY : Sera CHECKED BY: XD DESIGNED BY: Sera APPROVED BY: XD TITLE：CHIP2450-1608 Specification 深圳市朋伴兴业科技有限公司 THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 1608 SPEC REV.
深圳市朋伴兴业科技有限公司 Radiation Pattern The Gain pattern is measured in FAR-field chamber. DUT is placed on the table of rotator,a standard horn antenna and Vector Network Analyzer is used to collect data. Environmental Characteristics (1) Reliability Test (2) Storage Condition (a) At warehouse: The temperature should be within 0 ~ 30℃ and humidity should be less than 60% RH. The product should be used within 1 year from the time of delivery.
深圳市朋伴兴业科技有限公司 8. Recommended Reflow Soldering (1) Soldering Gun Procedure Note the follows, in case of using solder gun for replacement. (a) The tip temperature must be less than 350°C for the period within 3 seconds by using soldering gun under 30 W. (b) The soldering gun tip shall not touch this product directly. (2) Soldering Volume Note that excess of soldering volume will easily get crack the body of this product. UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.
深圳市朋伴兴业科技有限公司 Dimensions of paper taping: UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES ＝± HOLEDIA＝± SCALE：N/A UNIT：mm DRAWN BY : Sera CHECKED BY: XD DESIGNED BY: Sera APPROVED BY: XD TITLE：CHIP2450-1608 Specification 深圳市朋伴兴业科技有限公司 THESEDRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT NO. 1608 SPEC REV.
