Safety Instructions

2. TURBO speed adjustment (there are three speeds to adjust, the first power-on (when the reset button is pressed, the
next power-on is regarded as the first power-on)
The default is second gear)
Adjustment method: Adjustment method: press and hold the 5S TURBO key and hold the right 3D up to the maximum,
that is, increase the speed by one level
6. LED instructions
1) Four LEDs flash quickly and cyclically: it means that the handle is searching for wireless device pairing; this handle is
connecting back to the host through wireless pairing.
2) LED flashes quickly: when the battery voltage of the handle is lower than 3.6V; when it is lower than 3.4V, the handle
automatically shuts down and cannot be turned on.
3) The LED is always on: the controller and the host are successfully connected wirelessly.
4) LED flashes slowly: The handle is connected to the host through the USB cable; when the handle is connected to the
charger for charging, the four LEDs flash slowly at the same time, and the LED goes out when it is fully charged.
7. Handle parameter table
8. Precautions
project
Reference
Operating Voltage
DC 3.7-4.2V
Working current
20-30mA
Sleep current
10-50uA
Vibration current
80-150mA
USB input voltage/current
DC 5V/500mA
Use distance range
≤8M
Battery voltage/capacity
3.7V/600mAh
Battery duration after fully charged
About 6 hours
Charging time
2-3 hours
Standby time
About 30 days
Handle net weight
210g (235g including charging cable and
instructions)
Handle size
157*102*65.5mm
packing list
1 handle, 1 charging cable, 1 manual
Remarks: The above parameters are for reference only, and the actual use of the
product shall prevail.