Safety Instructions

8) The game can also be played normally while the controller is charging.
9) This handle can be upgraded with updated software by connecting to a computer.
2. Introduction to Buttons
1) HOME button*1: Turn on the handle or execute the command of the host; press and hold the HOME button for more
than 5 seconds to turn off the reset handle.
2) Direction keys*1 group: up, down, left, right. Easy operation in eight directions.
3) Function control keys *4: A, B, Y, X. Perfect button design, finger touch operation is more sensitive and quick.
4) Left and right joysticks*2: Left and right 3D joysticks, 360-degree accurate operation in all directions.
5) 4 function keys: L1, R1, L2, R2. Trigger and key switch design, quick response.
6) Screenshot key*1: Press the screenshot key in the game to take a screenshot and save the current screen.
7) TURBO key*1: A/B/X/Y/L1/L2/R1/R2 plus the cross key and Turbo key to set the Turbo function.
3. Online guidance
1) Connect to the SWH host via wireless:
A. Connect the handle to the host for the first time: turn on the SWH host, in the main menu interface of the host, touch
and click "Handle" → "Change grip" with your finger to enter the host pairing mode interface; on the handle, long press
the "HOME" button When the handle is turned on in 4 seconds, the four LED lights will flash in a rapid cycle and enter the
search state. When one (or more) LEDs are on, the handle is paired with the host successfully. Press the "B" key to return to
the main menu interface.
B. Connect the handle to the host again: When the host is on, short press the HOME button to turn on the handle, and the
handle is automatically connected to the host.
C. The handle is connected back to wake the host: the host screen is turned off, and the handle automatically sleeps. In
about 5 minutes, if the handle does not press any button, the handle automatically sleeps.
1. Wake up the handle: when the handle is sleeping, short press the HOME key, A\B\Y\X, arrow keys, -, +, L1, R1, and
screenshot keys to wake up the handle, the LED light flashes cyclically, and the handle Automatically connect back to the
host.
2. Wake up the host: In the host sleep state (not in flight mode), short press the controller HOME button for 1 second to