Instruction Manual

4
Siren alarm：The host sends the wireless code to control the wireless siren to give an alarm when the
host alarms.
Siren beep：The host sends a wireless code to control the wireless alarm to sound briefly for
prompting when the host state is switched.
Delay beep：The warning voice would be issued to evacuate the protection area as soon as possible to
avoid false triggering or cancellation of the alarm when the host is in a delayed protection or delayed
alarm state.
Door/Window warning：The host will advice the user that the status of door and window when the user
go outside.
Voice tone：There is the corresponding voice prompt when the user operating the host.
Key beep：There would be a corresponding voice prompt to improving the touch experience when
operating the keys of the host.
Doorbell volume：The host would sound the doorbell voice prompt when the doorbell defense area is
triggered.
Tamper switch：The host will sound an alarm when it is disassembled by external force.
Doorbell：You can click into menu option to choose the Accessories option to enter the password to
add doorbell accessories if you need to use the Doorbell. It will note “Ding Dong” anytime while be
triggered.
Alarm type：The user sets the corresponding alarm type according to the detector type and usage
scenario. This is convenient for the user to manage and distinguish the corresponding device type
after triggering the alarm.
The type of alarm is as follow： System alarm, Main-door alarm, Living room alarm, SOS alarm, Bed
room alarm, Window alarm, Balcony alarm, Environment Alarm, Fire Alarm, Gas Alarm, carbon
monoxide alarm and water leakage alarm.
Zone number：This function is use for making out the zone of detectors. The user can confirm the
location of alarm from this when detectors were triggered by someone.
Detector mode：7 options
(1) All Arm is effective：The trigger detector would give an alarm if someone enters the arming range
when the host in the modes of Out Arm or Stay Arm. It is recommended that the outdoor detector
sets this mode.
(2) Out Arm is effective：When the host is in the state of protection when at home, the detector in
this mode is triggered and would not alarm. It is recommended that the indoor detector set this
mode.
(3) Effective for 24 hours：The detector sets in this mode would give an alarm at any time regardless
of the state of the host. It is recommended to set this mode for detectors requiring timely