Instruction Manual

15
6.4. Installation and Disassembling Diagram of Doorbell
Characteristics：
(1) A variety of simple installation methods: support foam glue and screw fixing.
(2) No standby power consumption.
(3) DC12V power supply is adopted, with higher transmission power and longer wireless distance.
Installation step：
1.Firstly, the user need to hold the lower cover with your left hand, fasten the bottom of the upper cover
with the bottom of the lower cover
with your right hand. Secondly, The user need to press on the top of the lower cover along the top of the
upper cover, as shown on the right picture:
2. Installation is complete
Disassembling Step：
1. Holding the lower cover tightly with your left hand, drag the upper cover outward with your right hand,
and then open it upward along the bottom of the upper cover, as shown on the right figure: