USER MANUAL SOLAR CHARGER Model: DN49
service@licorne.
service@licorne.
service@licorne.ltd SPECIFICATION Battery Capacity 36800mAh Battery Type Polymer lithium Type-C Quick Charge Input/Output Port 5V/3A Micro USB Input Port 5V/2A USB Quick Charge Output Port 5V/3A Wireless Charging Output 5W Lightning/ Type-C / Micro USB Cable Output 5V/2A Solar panel output 5V/330mA Product Weight 1.04lb Dimensions 6.89*3.35*1.
service@licorne.ltd INSTRUCTIONS 1. Turn on/Turn off Gently press the power switch, then the LED battery indicators and wireless charging function are on. If you do not need the LED battery indicators and wireless charging function, just plug in your device then it will charge. If there are no charging devices, the power bank will automatically shut down in 30 seconds. 2.
service@licorne.ltd Wireless Charging Turn on the power switch and the BLUE indicators on the solar panel are on, the wireless charging RED indicator in the back is on. Put your mobile phone in the wireless charging area and the charging will be on. The indicator will turn green while it is charging. If you normally use a protective case for your phone, please make sure that your phone case is not made of metal and the suitable thickness is less than 6mm. 4.
service@licorne.ltd ATTENTION 1. Please do not disassemble the power bank. 2. Keep dry and keep away from fire. Please do not use chemicals to clean the power bank. 3. The operating temperature of this product is 32 45 to 113 ), so please don't put it in temperatures above 140 (0 to (60 ). (Including places close to heat sources, such as stoves, heating, etc.) 4.
service@licorne.ltd WARRANTY (1) We provided 24 months of warranty and lifetime technical support. (2) Within 30 days from the date of purchase, products in good packaging and without damage can be returned and fully refunded. (3) A free exchange for products having quality problems within 12 months. (3) If you are not 100% satisfied with our products, please feel free to contact our customer service at service@licorne.ltd.
FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment.
