Operating Instructions

30
6.E05 display: Over load current protect
a: May be the current is too strong, the system protect itself, please restart the machine.
b: May be a part of the machine is locked and result in the motor problem, please add the oil
to the machine and restart.
c: Please check if there is bad smell from the motor, if there is, please change a new motor;
d: Please check if there is bad smell from the driver, if there is, please change a new driver;
7. Can not start the machine: After press the start button, the time is counting,but the motor
can not work, and there is no error number showed on screen.
a: Please check the wire in motor is connected well;
b: Please the safety pipe on the driver, if it is broken, change a new one.
c: Please check the IGBT on the driver, if it is broken, change a new IGBT or a new driver.