Operating Instructions

25
LUBRICATING THE TREADMILL
IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use.
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the running board and running belt is essential as the friction between the two
affects the life span and function of the treadmill, therefore it is suggested that the running
board and belt be inspected regularly.
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating
or repairing the unit.
HOW TO LUBRICATE:
1. Raise the belt up on one side and use a rag to thoroughly wipe the dust on the running
deck， then apply lubricant to the running deck.Repeat this process for the other side.
2. After apply lubricant，start the machine and let it run without using at a low speed , so
that the lubricant can apply to the running deck evenly.
3. To better maintain the treadmill and prolong its lifespan, it is suggested that maintenance
be done on a regular basis.
The following time table is recommended:
Light user (less than 3 hours/ week) every six months
Medium user (3-5 hours/ week) every three months
Heavy user (more than 5 hours/ week) every two months
WARNING: This machine has lubrication remind function. After every total running distance
of 300km , treadmill screen will remind “ DI DI DI “with lubrication. Please read the user’s
manual first, and add the oil to the middle part of running board, and after that close the
window.
After the lubricant is added, press and hold the "STOP" key for 3 seconds in standby state,
the system will clear the refueling reminder
EXPLODED DRAWING