Operating Instructions

20
button to adjust the speed when the machine is working.
6、“INCLINE+” , “ INCLINE-” button: Press this button to set the value under setting mode. Press this
button to adjust the incline when the machine is working.
7、”INCLINE: 2、4、6、8 、10、12、14” incline shortcut button: set incline quickly
8、“SPEED：2、
、、
、3、
、、
、4、
、、
、5 、
、、
、6、
、、
、7、
、、
、8” speed shortcut button：set speed quickly
9、”CLOCK” setting: Under standby mode, press “SPEED +” and “SPEED –“ buttons 3 seconds
synchronously to enter clock setting. Press “SPEED +” “SPEED –““INCLINE +” “INCLINE –“ to adjust the
time, press“MODE” button to transfer the hour and minute. After you finish setting, press “PROGRAM” to
confirm.
START-UP QUICKLY(MANUAL)
1、Open the power switch, attach the magnet end of the safety pulling rope to the computer.
2、Press STATR button，the system will enter into 3 seconds count down, the buzzer will make sound
and the speed window display count down, the speed will run 0.6MPH after 3 seconds.
3、After start-up, you can use speed up or down to adjust the speed up or down, and use incline up or
down to adjust the incline up or down.
THE OPERATION OF EXERCISE PROCESS:
1. Press speed-down will reduce the running speed.
2. Press speed-up will increase the running speed.
3. Press incline down will reduce the incline section.
4. Press incline up will increase the incline section.
5. Press the speed shortcut button will adjust the running speed.
6. Press incline shortcut button will adjust the incline section.
7. Press the stop button will stop the machine.
8. Holding the handle pulse with two hands about 5 seconds will show the pulse data.
MANUAL MODE:
1.Under standby mode, press START button directly, the treadmill will work from the speed 0.6 MPH,
incline 0. The other windows will start to count from positive direction from windows default, press
“SPEED+”, “SPEED-” change the speed, press “INCLINE+”、“INCLINE -”to change the incline;
2. Under standby mode, press “MODE” button to enter time count down, the TIME window will
display“15：00” and glittering. Press “SPEED+”, “SPEED-” , “INCLINE+”、 “INCLINE –“ to set up the
time what you need. The setting range is 5:00-99:00.
3.In Time setting model, press “ MODE “ button to enter into distance count down, the DISTANCE
window will display “1.0” and glittering. Press “SPEED+”, “SPEED-”, “INCLINE+”、 “INCLINE –“ to set up
the distance what you need. The setting range is 0.5—99.9.
4. To set up the Distance, press “MODE” button to enter into calories count down, the CAL window will
display “50’ and glittering. Press “SPEED+”, “SPEED-” , “INCLINE+”、 “INCLINE –“ to set up the
calories what you need. The setting range is 10-999.
5. When setting is finished, press “START” button to start up, the treadmill will run after 3 seconds, press
“SPEED+”, “SPEED-”, “INCLINE+”、 “INCLINE –“ to adjust the speed and the incline; press the STOP,
the treadmill will stop.
INNER INSTALL PROGRAM
There are 15 kinds of inner install program from P1-P15 for this machine.
In initial situation, Press “PROGRAM” button DISTANCE window will display P1-P15.
Choose your favorite program, at the same time, the TIME window is glittering. Display the advance
setting time10:00, press “SPEED+”, “SPEED-”, “INCLINE+”、 “INCLINE –“ to set up the exercise time
you want. Press “START” button to start the program you have set. The inner install program can be
divided into 10 sections. The time for each section=Total time you have set/10. During the operation of
each section, you can press SPEED and INCLINE button to adjust speed and incline, but the machine
will recover to be parameter have set when enter into the next section.
When the machie finish one program, the system will make 3 sound “B—B—B—“ and stop steadily.