Operating Instructions

11
OPERATION GUIDE
WINDOW DISPLAY:
1、“TIME/CAL” window: Display exercise time from 0:00-99:59 ,when count to 99:59, the
machine will stop smoothly and show ‘ End ‘, then enter into initial situation after 5 seconds;
When count down, it will show from the setting time to 99:00, when down to 0:00 , the
machine will stop smoothly and show ‘ End ’, and will enter into the initial situation.Display
exerciser calories worked out. It will count from 0.0 to 9999,when up to 9999, it will count
again from 0; when count down, it will count from the setting data to 0, when down to 0,the
machine will stop smoothly and show ‘ End ’, and enter into the situation waiting for operation
after 5 seconds.
2、“SPEED” window:Folding the handle bar to switch between walking and running mode:
★Handlebar fold down, the machine will "beep" to set in walking mode, with speed range of
0.5-4.0MPH.
★Handlebar lift up, the machine will "beep" to switch to running mode, with speed range of
0.5-8.0MPH.
3、“DIS./STEP” window:Display the running distance from 0.00-99.9, when up to 99.9, it will
count again from 0; When count down, it will show from setting data to 0; When down to 0,
the machine will stop smoothly and show ‘End’, enter into the initial situation after 5 seconds;
Display the runner steps, the step range : 0-9999 steps. In the standby mode, the window
displays“P1-P2-P3......P12”
REMOTE CONTROL FUNCTIONS:
If the remote control has no response or you change a new one, the remote control and
treadmill need to re-establish communication.
Re-establish communication method: Restart the treadmill, at the same time press and hold
the start/ stop button on the remote control for 5 seconds, hearing the sound of “Beep”,that
means matching is successful .
Note: The remote control has no response, may be the battery is out of power.
1、 : START/STOP BUTTON: Press the START button,this machine will start to work.
0.5MPH is the default start speed.During the running,you also can press this button to stop
the machine.
2、 : SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the
speed in increments of 0.1 MPH. Pressing and holding either of these buttons for a duration
of over ½ a second will increase or decrease the speed continually.