Operating Instructions

REMOTE CONTROL FUNCTIONS:
When you open the carton, you will find the below spare part——remote control：
The remote controller is connected with the treadmill to realize the operation of
switching the treadmill START/STOP and adjusting the speed.
If the remote control has no response or you change a new one, the remote control
and treadmill need to re-establish communication.
Re-establish communication method: Restart the treadmill, at the same time press
and hold the start/ stop button on the remote control for 5 seconds, hearing the
sound of “Beep”, that means matching is successful.
Note:
The remote control has no response, may be the battery is out of power.
1. START/STOP BUTTON: Press the START button, this machine will start to work.
0.5MPH is the default start speed. During the running, you also can press this button
to stop the machine.
2. SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in
increments of 0.1 MPH. Pressing and holding either of these buttons for a duration of
over ½ a second will increase or decrease the speed continually.