User's Manual

GARDEN LED

User Manual

Scan the QR-Code to download the APP

1、 BLE Connection

For the first time you use it or never pair with ‘

GARDEN LED

’ after

moving the device, please following the below steps:

A、First, please enter your phone settings, open the Bluetooth.

B、Second, open the GARDEN LED app, the app will auto to connect

the device.

PAGE 1
GARDEN LED User Manual Scan the QR-Code to download the APP 1、 BLE Connection For the first time you use it or never pair with ‘GARDEN LED’ after moving the device, please following the below steps: A、First, please enter your phone settings, B、Second, the device. open the GARDEN LED app, open the Bluetooth.
PAGE 2
PAGE 3
2、 Main User Interface A、Adjust: Change colors and brightness.
PAGE 4
B、Music: Play music and change colors by music rhythm.
PAGE 5
C、Tape: Change colors by phone microphone input voice rhythm.
PAGE 6
D、Style: Change colors by fixed mode.
PAGE 7
E 、Timing: Set timers, can auto On/Off the device.
PAGE 8
F、Setting: Shake: Change colors by shake the phone.
PAGE 9
Dream Settings: When have the dream function, can set the LED Type, RGB Output Sequence, requires password.
PAGE 10
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.