User's Manual

Basic parameters:
Bluetooth Name: SK7 or SK8
Body Size: 44.0*38.0*10.9mm
Body Material: Zinc Alloy+Electroplating+ABS+IML
Strap Material: Silicone
Games: Racing +2048
Bluetooth: BT2.1+EDR+BLE5.0
UI Style: Babysbreath, Nine Palace, GearWheel
UI Style: Babysbreath, Nine Palace, GearWheel
Support System: Android 5.0 or IOS 9.0 and above
General Functions: Stopwatch, Calculator, Alarm Clock, Flashlight, Calendar
Supported Languages: English, Simplified Chinese, French, Spanish, Polish,
Portuguese, Italian, German, Dutch,Turkish, Russian, Czech, Hungarian, Malay,
Filipino, Indonesian, Vietnamese, Greek, Persian, Arabic, Thai, Hebrew, Finnish,
Ukrainian
Dial-Up
Connect to the mobile phone to dial out via Bluetooth,
and you can make a call on the watch side.
Contact
After the watch is successfully connected to the APP,
you can add a contact in the APP. After the contact is
successfully added, the phone book of the watch will
be displayed synchronously, and the watch can click
on the contact in the phone book to make a call (Note:
The watch needs to be connected to the Bluetooth of
The watch needs to be connected to the Bluetooth of
the mobile phone)
Information
It can display the content of the message push, such as:
SMS, Facebok, Twitter, etc. (The system above IOS12
will block SMS reminders by default)
Sports
1.Enter the sport mode (running, walking, cycling,
climbing, indoor running) selection interface, click
again to start the corresponding sport mode data
monitoring: exercise time, distance, calories burned
and heart rate data.
2.Record: record all exercise data.
2.Record: record all exercise data.
Pedometer
Count the step count data of the day, swipe left to
view the step count record, clear the data at 00:00
in the morning, or view it in the APP, the APP can
set the number of steps per day to reach the standard
value, and the watch will have reminder of compliance.
Sleep Monitoring
Turn on sleep detection to monitor the quality of sleep
while sleeping, and view data such as sleep duration,
rapid sleep, deep sleep, light sleep, etc.
Sedentary Reminder
Set the sedentary time, the watch will vibrate when the
time is up, and there will be a reminder icon on the
interface.
Heart Rate
Put the watch close to your wrist, and the best place to
wear it is the wrist bone above your arm. The real-time
heart rate can be measured. The normal value is 60-100
beats per minute for ordinary people. Swipe left to view
the heart rate record.
Bluetooth Music
Control to play music in the phone, "+", "-" to adjust
the volume.
Temperature
Display the current body temperature (the normal body
temperature of the human body is 36~37 ℃)
Blood Oxygen Monitoring
close the watch to the wrist, the best wearing position is
on the wrist bone above the arm, real-time blood oxygen
value can be measured, the normal range of the value is
generally 95% to 100%, swipe left to view the blood
oxygen record.
Blood Pressure
Put the watch close to your wrist, and the best place to
wear it is the wrist bone above your arm. Real-time
blood pressure can be measured. Adult diastolic blood
pressure: 60~80 (mmHg) Adult systolic blood pressure:
100~120 (mmHg), slide left Can view blood pressure
records.
records.
Find The Phone
When the watch and the phone are connected, click the
"Start" button, the phone will sound a ringtone and a
prompt box will pop up.
Drinking Water Reminder
Set a reminder time for drinking water. When the time
is up, the watch will have an interface reminder icon.
Style
Three UI styles can be set and replaced
Settings
Including time setting, scene mode, brightness, language
setting, password lock, sidebar, factory reset, about this
machine.
Power Button:
short press to wake up/off, long press to
switch the machine
1. Rotate the button on the dial page
to preview all dials
2. Short press to enter the menu
3. Rotate the button on the menu page
to zoom in or zoom out the icon
4. Short press on the remaining
interfaces to return to the dial page
interfaces to return to the dial page
Rotate Button:
（Android 5.0 or IOS 9.0 and above）
APP Download and Connection: Product Description: Operating Instructions: Features:
What is our warranty policy? - 100% Satisfaction Guarantee, Free returns and
refund within 90 Days.
Within 90 days, if our watch has any quality problems, please feel free to contact us
and we will replace it for you for free. If this smart watch can't meet all your needs,
you are not 100% satisfied with it, just contact our after-sale service by this email
([e-mail]), they will help you deal with your refund.
Please believe that we will give you the most satisfactory solution. So please feel
Please believe that we will give you the most satisfactory solution. So please feel
free to contact us before giving us a negative review.
How does this watch work with an iPhone?
Just connect the smart watch with your iPhone via bluetooth. For iPhone, it supports
answering & call, phone book, music play, camera, clock, pedometer, sleep monito-
ring, sedentary reminder, blood pressure monitoring, blood oxygen and temperature
test all functions. It is the best companion of iphone.
Why my phone cannot connect with the smart watch by Bluetooth?
First, please make sure your smart phone's Bluetooth is ON.
Second, because this smartwatch is Bluetooth 5.0, all functions support Android 5.0
& IOS 9.0 and up smart phones, please make sure your mobile phone software
version is above this range.
Third, please make sure the device is near the smart phone when pairing (the
effective distance is about 10m).
effective distance is about 10m).
Dose the smart watch waterproof?
This smartwatch only supports life waterproofing. For example, you can wear and
use smartwatch during exercising (sweat is ok), in light rain, and while washing
your hands. It does not support showering, diving, swimming when wearing!
How to download and install the APP "M2 Wear" (for Android and IOS phones)
1. Please download the sync APP to your smartphone by scanning the QR code on
the manual (There is a QR code icon in the function menu of the watch. Click it and
you will get a QR code). This app will only be used for the synchronization between
your phone and the watch, will not take any data of your phone.
2. You can also search and download the "M2 Wear" from the APP Store or Google
Play Store.
Play Store.
3. If you have already installed the app, please check the version and update to the
newest, so that all the features can be used normally. Please update the app when it
has a new version.
Is the detected data of heart rate, step, blood pressure, blood oxygen and
temperature accurate?
The chips used are not the most powerful as a super cost-effective smart watch. The
measurement results are for reference only and shall not be used as any medical
purpose or basis. It is suitable for daily use, considering it is measured by scientific
algorithm, but it cannot guarantee absolute accuracy.
Can the battery and strap of this watch be replaced?
This watch is not allowed to replace battery while the strap can be replaced. Note that
one end of the short strap faces the upper part of the dial, and the long strap faces the
lower part of the dial. And pay attention to the strength for insertion. The strap is
made of silica gel, so you don't have to worry about breaking due to excessive force.
Why cannot charge the smart watch?
First of all, it is necessary to ensure whether the charging line is in correct contact
with the watch. Secondly, it requires to charge for 2 hours after complete crash, and
then observe whether it can be charged. Finally, if the watch still can't charge in, you
can contact us at any time, and we will serve you wholeheartedly.
GUARANTEE & SERVICE
We're just happy that you're happy!
Our friendly and hassle-free customer service team will work hard to put a smile back
on your face. If you encounter any problems while using the watch, I hope you believe
our sincerity and contact us at any time. We will help you deal with it at the first time.
We sincerely hope bring you and your family a happier life with our smart watch.
FAQ:
If there is any problem during the use of the watch, please referto the following
clauses to resolve it. If the problem persists, please contact our service personnel.
1. The watch cannot be turned on
Press the power button for too shorta time, please press it for more than 3 seconds.
The battery levelis too low, please connect the charger to charge.
2. The watch will automatically shut down
The battery levelis too low, please connect the charger to charge.
The battery levelis too low, please connect the charger to charge.
3. The use of the watch is short
The battery is not fully charged. Make sure you have enough time to charge it
(minimum 2 hours).
4. The watch does not charge properly
Please check ifthe battery is available, the performance of the battery will decrease
after using for several years. If the charger is charging normally, you can update to
try with the charger. If the USB cable is connected properly, please try again.
try with the charger. If the USB cable is connected properly, please try again.
5. Caller name is not displayed when receiving a call
When the Bluetooth connection is selected, the address book is not selected to be
uploaded; or the Always upload address bookis not selected; Disconnect and
reconnect, the contacts are not synchronized, please pair and reconnct again.
6. The sound quality ofthe call is not very good
Your smart watch is too far away from your phone, please come closer; the
Bluetooth signal is too poor, Your cellphone has a bad signal, change a call location.
Bluetooth signal is too poor, Your cellphone has a bad signal, change a call location.
Common Troubleshooting:
◆ In daily use, avoid wearing the watch for hot showers, saunas and diving. When
the water meter gets wet, please wipe the surface water stains dry with a soft cloth
before operating.
◆ The measurement results of this product are for reference only, and the data
provided by the product is not to be used as a basis for any medical purposes.
◆ If you use a power adapter for charging, you should use a power adapter that
meets the requirements of the corresponding safety standards to avoid bursting
meets the requirements of the corresponding safety standards to avoid bursting
or fire caused by fake power adapters.
Precautions:
1.Scan the QR code to download and install the "M2 Wear" APP
Wear correctly:
The watch is best worn after the ulna styloid process.
Adjust the size of the wrist according to the adjustment hole; buckle
the wrist strap.
Leep the sensor close to skin and avoid moving.
Charge your watch:
For the first time use, make sure that the watch has normal power. If the
lowpower does not work, please connect the charger to charge the device.
Touch
Screen
Swipe left:
Menu list
Swipe right:
sidebar function
Swipe up and down: shortcut menu
1. Sidebar function: Swipe right to appear on the dial, swipe left or tap the screen
to return.
2. Menu list: Swipe left on the dial to enter the menu list, click a menu icon to
enter the corresponding function, slide right to return, or press the spin button to
return to the dial.
3. Shortcut menu: slide up and down on the dial to display shortcut functions
(including: Bluetooth call switch, QR code, brightness adjustment, scene mode,
(including: Bluetooth call switch, QR code, brightness adjustment, scene mode,
style switching, Bluetooth music, etc.), click the icon to directly enter this function,
slide right or single-click to rotate button to return.
4. Dial switch: Long press screen on the dial page to enter the dial preview interface,
slide left and right to preview and select the corresponding dial, after clicking OK,
the dial setting is successful.
Note: The other two dials are "custom dial" and "mall push dial". The dials will
change with the settings of the APP-side dial mall and DIY dials.
change with the settings of the APP-side dial mall and DIY dials.
Smart Watch
User Manual