Instruction Manual

ManualsBrandsShenzhen Xiaoju Intelligent Technology ManualsSmart WatchShenzhen Xiaoju Intelligent Technology G50 Smart Watch

Instruction Manual for G50

To bring you a better experience, please read these Instructions carefully.

A. Bind Your Device

a. Download and Install the App

Download the InxFIT App by scanning the QR code or searching in the App Store.

Note: the operating system of your mobile phone needs to meet the following requirements:

iOS 10.0 or Android 5.0 Bluetooth 5.0

1. Scan the QR code below to download the InxFIT App.

2. Open the App Store on your mobile phone, search for “InxFIT”, and then download the InxFIT App.

(The QR code may be updated.)

Summary of content (9 pages)

PAGE 1
Instruction Manual for G50 To bring you a better experience, please read these Instructions carefully. A. Bind Your Device a. Download and Install the App Download the InxFIT App by scanning the QR code or searching in the App Store. Note: the operating system of your mobile phone needs to meet the following requirements: iOS 10.0 1. or Android 5.0 Bluetooth 5.0 Scan the QR code below to download the InxFIT App. (The QR code may be updated.) 2.
PAGE 2
b. Binding Steps (Note: during the binding process, InxFIT will ask you to turn on the Bluetooth of your mobile phone and authorize InxFIT to access the GPS of your mobile phone. For IOS user, when a binding error occurs, please ignore this device in the Bluetooth list of your mobile phone first.) 1. On the Home page of the App, click “+” at the upper right corner and select [Add Device] to search for your watch. Find your watch in the Device List and click it to bind it. 2.
PAGE 3
B. Data Synchronization The watch records various data on your activities when it is worn on your wrist. You can synchronize data with the App as follows: start the InxFIT App, and pull down the page to start a data synchronization. The synchronization progress is displayed on the page. Note: please perform a data synchronization at least every 7 days, or the data will be overwritten when the memory is full. C. Instructions for Use a.
PAGE 4
b. Wearing and Adjustment 1. Wear Your Watch Leave one-finger gap between the watch and your wrist bone, and adjust the strap to a comfortable length.
PAGE 5
2. Replace the Strap Push the push button horizontally to loosen the strap, and then remove the strap. Push button Note: too loose or too tight wearing may affect the accuracy of HR or SpO2 measurement.
PAGE 6
D. Operating Instructions a. Button Operations Press the button: return to the dial, or switch between the dial and function list. Press and hold the button: turn on/off the device. b. Change the Dial Press and hold the dial screen to display the dial selection list after vibration. Swipe horizontally to select the desired dial, and then click it to apply it.
PAGE 7
c. Screen Operations Swipe the screen to enter different interfaces as shown below. E. Function Overview 1.
PAGE 8
Note: the Weather function needs to be enabled on the App. More details on the functions can be found on the App. 2. Initiate an Exercise a. To start an exercise: click the “Sports” icon → select a sport → the exercise data recording will start at the end of the countdown. b. Control the exercise: press the side button to pause the exercise recording; press the side button again or click [Resume] on the screen to resume the exercise recording. c.
PAGE 9
It is recommended to wear and clean the product as follows: 1. Keep the product clean. 2. Keep the product dry. 3. Don’t wear the product too tightly. Do not use detergents to clean the device. You can use soap-free detergents. For stains that are not easy to remove, it is recommended to clean with alcohol. H. Safety and Certification (see the certificates) The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.