User's Manual

21 / 42
42
5/10
17
2
1
40
200
8 customizable
prescriptions
Duration / interval, Time, Ramp up, Ramp down, Frequency and Pulse width can be set by the user.
5.2.6.2 ETS Mode
1) Click icon to enter the home page of ETS/PAS mode.
2) Click ETS icon to switch to ETS mode.
3) Click Setting icon to pop up the window of parameters.
4) Adjust the parameters by sliding the finger on the screen for each parameter.
5) After all the parameters are set, click “OK” to return to the home page of ETS mode.
6) Click Start icon to start the treatment.
7) Press “+” or “-” on the stimulator to adjust the intensity, and the intensity value will display on the iPad.
8) User can click icon of “LOW”, “MED”, or “HIG” to display different range of EMG.
 “LOW”: 0-300μV

“MED”: 0-600μV

“HIG”: 0-1000μV
1. Click ETS/PAS icon
2. Select ETS icon
3. Click the setting icon
4. Set the parameters
5. Click “OK” to send the parameters
6. Press Start icon to start the treatment
7. Intensity value
8. EMG ranges