User's Manual

17 / 42
water to the area of skin that will be in contact with the electrodes.
5.2.3 Power on
Hold the power button for 1 second and you will see the following interface: The display will go to the default NMES
mode in 3 seconds. Press the mode button to switch and select among NMES, ETS, PAS, EMG, GAME mode.
5.2.4 Connect with APP
 Press “Mode” button to select the “GAME” mode on the stimulator.
 Run SEMG-2003E APP on the iPad.
 Account registration is required for the first use.
 Enter the account number, password and confirmation password as required.
 If you forget your password, you can click to change it.
 Enter and confirm the password as required.

Log in on the iPad.

Click “Search” to search the Stimulator.

Choose the Stimulator and Click “Connect”.
 Enter the home interface on the iPad.
1.Select GAME mode
2.Run the SEMG-2003E APP on the
iPad
3.Register an Account
4.Log in the account、Password、Confirm
Password
5.Change Password
6.Enter Password and Confirm
Password
7.Log in on the iPad
8.Search device
9.Connect device