User's Manual

13 / 42
1. Take out the Power Adapter and the
Charging Cable
2. Connect the Power Adapter and the
Charging Cable
3. Connect the Stimulator Cable and the
Stimulator
4. Battery icon on the Stimulator
5. Fully charged
5. Operation Instruction

Use a sponge or a soft cloth to remove dust and dirt from the electrode surface before use, please keep the electrode
clean.
 After cleaning, wipe the electrode with a sponge or a soft cloth dampened with disinfectant (do not rub too much
disinfectant liquid on a sponge or a soft cloth to avoid splashing into the inside of the device causing malfunction or
danger). The disinfectant is a 75% ethyl alcohol.
 Wipe the electrode 3 times with a sponge or a soft cloth dampened with disinfectant to disinfect the product surface
for at least 30s.
 Before using the device please use water to clean and wet the skin area where electrodes will be attached.
The Stimulator can be used with or without the APP.
5.1 Use without the APP
5.1.1 Wear the Stimulator
Please wear the device on the right location according to your need.
Electrode Placement
(Stimulated Muscles)
Motion
Extensor Digitorum Muscle
Finger Extension and Wrist Extension
Extensor Carpi Ulnars Muscle
Wrist Extension,and make the wrist adduction