User's Manual

12 / 42
the treatment.
6) After, the treatment is complete, press the power button to turn off the device.
7) Take off the device from the arm.
8) Clean the metal electrode and the device with a soft cloth, and then store it in the portable case.
1.Peel off the transparent film
2. Add some water to the area of skin
3.Wear the Stimulator
4.Press the power button
5.Press the mode Button
6.Press the power button
7.Remove the Stimulator
8.Clean the metal electrodes
4.2 Charging the XFT-2003EA Nerve and Muscle Stimulator
1) Take out the Power Adapter and the Charging Cable from the packaging.
2) Insert the USB end on the charging cable into the USB port of the charger.
3) Connect the magnetic end of the charging cable to the charging port of the Stimulator.
4) The battery icon will display on the screen of the Stimulator to indicate charging.
5) The battery icon will display on the screen of the device when it is fully charged.