User's Manual

40 / 44
Surge
IEC 61000-4-5
±0.5kV, ±1kV
line-to-line
±0.5kV, ±1kV, ±2kV
line-to-ground
±0.5kV, ±1kV
line-to-line
±0.5kV, ±1kV,
±2kV
line-to-ground
Voltage dips
IEC 61000-4-11
0 % UT; 0.5 cycle
At 0°, 45°, 90°, 135°,
180°, 225°, 270° and
315°
0 % UT; 0.5
cycle
At 0°, 45°, 90°,
135°, 180°, 225°,
270° and 315°
Mains power quality should be typical commercial or
hospital environment. UPS power is recommended if this
device needs to be used continuously.
0 % UT; 1 cycle
and
70 % UT; 25/30 cycles
Single phase: at 0°
0 % UT; 1 cycle
and
70 % UT; 25/30
cycles
Single phase: at
0°
Voltage
interruptions
IEC 61000-4-11
0% UT; 250/300 cycle
0% UT;
250/300 cycle
RATED power
frequency
magnetic fields
IEC 61000-4-8
30A/m
50Hz or 60Hz
30A/m
50Hz or 60Hz
Power frequency magnetic fields should be at levels
characteristic of a typical location in a typical commercial
or hospital environment.
Note: UT is the A.C. mains voltage prior to application of the test level.
Table 3
MANUFACTURER’S DECLARATION-ELECTROMAGNETIC IMMUNITY
This equipment should be used in the electromagnetic environment specified below. The user should comply to specifications
ensuring the device is only used in an appropriate environment.
Immunity test
IEC 60601 test
level
Compliance
level
Electromagnetic environment - guidance
Conducted RF
IEC 61000-4-6
3Vrms
150 kHz to 80
MHz
6Vrms
in ISM and
amateur radio
bands between
150 kHz and 80
MHz (a)
3Vrms
6Vrms
Portable and mobile RF communications equipment should be
used no closer to any parts than the recommended separation
distance that calculated from the equation applicable to the
frequency of the transmitter.
Recommended separation distance:
Pd 2.1
150 kHz to 80 MHz
Pd 2.1
80MHz to 800 MHz
Pd 3.2
800MHz to 2.7GHz
at RF wireless communications equipment bands (Portable RF
communications equipment (including peripherals such as antenna