User's Manual

32 / 44
5.3.2 Treatment Intensity Limit
The user can set up an intensity limit by using the application for example if the user sets up the maximum intensity to 25mA,
then the maximum electrical output would be 25mA. The limit range is 0~60 mA.
Note: If user doesn’t want the treatment time to be limited, then the limit value can be set as 0.
5.3.3 Low Battery Indication
It will flash once per second when the battery is lower than 10%, and the stimulator will stop and auto off in 5 minutes. The
simulator will auto off in 5 seconds when the battery is lower than 2%.
5.3.4 Loose Electrodes Indication
The electrodes loose indicator will display and the stimulator will stop when the electrodes and the skin have poor contact.