User's Manual

15 / 44
4.3 Charging the XFT-2003E Upper Extremity Rehab System
1) Take out the Power Adapter and the Charging Cable from the packaging.
2) Insert the USB end on the charging cable into the USB port of the charger.
3) Connect the Type-C end on the charging cable to the charging port on the Stimulator.
4) The battery icon will display on the screen of the Stimulator to indicate charging.
5) The battery icon will display on the screen of the device when it is fully charged
1. Take out the Power Adapter and the
Charging Cable
2. Connect the Power Adapter and the
Charging Cable
3. Connect the Stimulator Cable and the
Stimulator
4. Battery icon on the Stimulator
5. Fully charged
5. Operation Instruction

Use a sponge or a soft cloth to remove dust and dirt from the electrode surface before use, please keep the electrode clean.

After cleaning, wipe the electrode with a sponge or a soft cloth dampened with disinfectant (do not rub too much
disinfectant liquid on a sponge or a soft cloth to avoid splashing into the inside of the device causing malfunction or danger).
The disinfectant is a 75%
ethyl alcohol
.

Wipe the electrode 3 times with a sponge or a soft cloth dampened with disinfectant
to disinfect the product surface for at
least 30s.

Before using the device please use water to clean and wet the skin area where electrodes will be attached.