User's Manual

13 / 44
4.2 Use with electrode cable and hydrogel electrodes
Warning: DO NOT use the hydrogel electrodes for multiple times. The hydrogel electrodes are only intended to be
single used.
1) Plug the electrode cable into the electrode port of the Stimulator.
2) Connect the electrode cable to the hydrogel electrodes
3) Attached the electrodes to the desired body part i.e. shoulder, tricep, bicep or forearm flexors.
4) Press the power button to turn on the device.
5) Press the mode button to choose the mode (NMES mode, ETS mode, PAS mode, EMG mode, GAME mode) to start the
treatment.
6) After, the treatment is complete, press the power button to turn off the device. Press the Power button to turn the device
off.
7) Peel off the hydrogel electrodes from the body part, store the device and the accessories in the portable case
*User can adjust the position of the stimulator as the following picture to achieve different motion.
Mode
Electrode
Placement
Stimulated Muscles
Motion
ETS mode, PAS
mode, EMG mode,
GAME mode
Electrode connected
to red, yellow and
black wires
Extensor Digitorum
Muscle
Finger Extension and
Wrist Extension
EMG Test and GAME
NMES mode
Electrode connected
to red and yellow
wires
Extensor Digitorum
Muscle
Finger Extension and
Wrist Extension
ETS mode, PAS
mode, EMG mode,
GAME mode
Electrode connected
to red, yellow and
black wires
Extensor Carpi Ulnars
Muscle
Wrist Extension, and make
the wrist adduction;
EMG Test and GAME
NMES mode
Electrode connected
Extensor Carpi Ulnars
Wrist Extension, and make
Extensor
Digitorum Muscle
Extensor Carpi Ulnars
Muscle