User's Manual

Loop recording
1) Insert the microSD card into the memory card slot; the Loop Recording
mode turns on automatically.
2) It is recommended to set a 3-minute cycle (Settings).
3) When there is no more space left on the memory card, the device will
automatically replaces the oldest video file with the newest one; exception is
the files protected from deletion.
4) Video recordings taken in Loop Recording mode are stored in the Video
folder.
G-Sensor
G-Sensor is to protect the current video file from being overwritten and
deleted. In order to protect the current video file.
Parking mode
If you use the original accessory to connect the DVR to the fuse box, turn on
the Parking Mode on APP.
Deletion
Pls check on APP and select the file which you want to deletion
ATTENTION! Locked files can only be deleted when unlocked
6. About Updating Firmware
1) Download the firmware file (Pls contact with the supplier which you buy the
product)and extract the file from the archive.
2) Format the memory card and transfer the extracted file to the microSD
memory card.
3) Insert the memory card with the downloaded file into the DVR slot.
4) Connect the device to a power source and turn it on.
5) The indicator light will flash while the firmware file is being downloaded to
the device.
6) Upon completion of the process, the device will reboot automatically.
7) Check in the settings menu if the correct firmware version is displayed.