User's Manual

Turning the device on/off.
When the car engine starts, the device turns on automatically.
To turn the device on manually, press the power button.
To turn the device offand hold the power button for 3 seconds.
Loop recording
1) Insert the microSD card into the memory card slot; the Loop Recording
mode turns on automatically.
2) 2) It is recommended to set a 3-minute cycle (Settings).
3) 3) When there is no more space left on the memory card, the device will
automatically replaces the oldest video file with the newest one; exception is
the files protected from deletion.
4) Video recordings taken in Loop Recording mode are stored in the Driving
folder.
G-Sensor
G-Sensor is to protect the current video file from being overwritten and
deleted. In order to protect the current video file.
Night mode (Only exist on EC2 and EC3 model)
When this feature is on, the device determines the light level and reduces the
color of the image automatically to reduce noise for better resolution.
Parking mode
If you use the original accessory to connect the DVR to the fuse box, turn on
the Parking Mode in the menu.
Playback/Delete Files
Playback
- In the standby mode, press and hold the M button to switch to the view
mode.
- Select the file to view using the Up / Down and Confirm buttons.