User's Manual

Power connection
To power the device and charge the battery, use only the power adapter
included. Connect the power cable to the mount or DVR, then plug the charger
plug into the car’s cigarette lighter/socket.
When the car engine starts, the device turns on automatically.
5. Device operation
Device preparation
A. Insert the microSD card into the memory card slot.
Before installing a memory card, turn off the
device; insert the memory card until it is locked.
ATTENTION: Attempting to insert a memory card wrong may damage the
device and/or the memory card itself. Make sure the memory card is in
the correct position.
Warning: Do not apply excessive force when inserting a memory card to avoid
damage to the device. To insert a memory card, insert the microSD card into
the slot until it locks (clicks); if necessary, use a needle to push the card further.
To remove the memory card, push the card until it clicks and remove the card
from the slot, if necessary, use a needle to push the card.