User's Manual

2) Format the memory card and transfer the extracted file to the microSD
memory card.
3) Insert the memory card with the downloaded file into the DVR slot.
4) Connect the device to a power source and turn it on.
5) The indicator light will flash while the firmware file is being downloaded to
the device.
6) Upon completion of the process, the device will reboot automatically.
7) Check in the settings menu if the correct firmware version is displayed.
8) Format the memory card with the DVR menu. ATTENTION! If the memory
card is not formatted after the update, the update process will be started again
the next time it is turned on.
ATTENTION! Do not turn off the DVR power during the firmware update.
7. Possible problems and their causes
This section helps you to eliminate problems the device may have under
normal operation.
- Failure to photograph/record video.
Check if there is enough free space on the microSD card and if it is not
blocked.
- Spontaneous stop at recording.
Too many video files stored. Only use at least class 10 high-speed microSD
cards by proven manufacturers.
- When you try to view a photo/play a video file, the“wrong file”message
appears.
File writing failure due to microSD card file system error. Format the microSD
card.
- Blurred image.
Check for dirt on the lens and the CPL filter. If there is any, wipe the lens with a
soft cloth before use (it is recommended to use special care products for the
optics in order not to damage the surface of the lens).
- Darkened image when photographing the sky or water.
Too much contrast in the scene may affect the exposure. Change the exposure
in the settings menu.
- Hangup (no image, no button response).
Press the RESET button to reboot the device.