Users Manual

（Tips：Please make reasonable volume and time, it will damage your hearing if it is continuous long time
and high volume.）
Reset: (right / left earphones pair)
If two earphones cannot be connected each other or they cannot connect to the mobile phone bluetooth due to
mis-operation, you can reset the earphones as the following method.
Put the earphones into the charging box and enter into the charging mode, triple-click the earphone touch control at the
same time, until the blue lights flash twice. (You can do this one by one. ) Then take the both earphones out of the
charging box and long touch the earphones for 5 seconds at the same time, until the earphones “Blue and white light”
flashes alternative then release. They will enter into paring mode automatically. After successfully connection, turn on the
mobile phone bluetooth and connect.
Earphone charging:
1. Put two earphones into the charging box, cover the lid and the they will enter into charging mode after several seconds.
2. blue indicators will flash slowly in charging mode.
3. Charging is completed: after the earphones are full power, the blue light will go out automatically, and the charging box
will automatically cut off after 30 seconds.
Charging box battery charging
1. Please power the charging case by DC5V/1A adapter, PC USB port of PC or other DC5V is OK.
2. In the charging mode, three blue LED indicator lights on the case show the battery capacity.
Battery capacity indicator
A. One blue indicator flashes is 0%-30%
B. One indicator stays blue and one blue indicator flashes is 30%-60%
C. Three indicators stay blue is 60%-100%.
Please disconnect charging devices from the charging case once fully charged.
Note: please charge for the case with DC5V/1A charger or Computer USB; As the charging and discharging of the
earphones increases, the battery performance will decrease, which is normal for all rechargeable batteries. (Don’t press
the contact of the spring pin hard to avoid improper use.)
Power bank function:
The charging box can be as power bank for your mobile phone. Charge your Android or IOS device by connecting the Micro
USB cable to the charge port of your device and the standard USB connector of the charging box.
(Tips：Please check the indicator of the charging box before charge to the mobile phone. When all 3 indicators are lighting,
the charging box can be better charged for the mobile phone. )
Specification:
Bluetooth version
V5.0
Support profile
A2DP/AVRCP/HFP/HSP