Users Manual

Power off:
There are two ways to power off the earphones --
1) Put the earphones into the charging box , they will power off automatically and enter into charging mode.
2) Disconnect the bluetooth connection between your mobile phone and the earphones, the earphones will power off
automatically after about 5 minutes.
Indicator light status:
A. White indicator flashes three times-Power on；Blue indicator flashes three times-Power off.
B. Indicator light off - Not connected.
C. Blue and White indicator flashes alternately- Two earphones connected and waiting connection with mobile phone.
D. White indicator flashes slowly every 5 seconds- Connected with mobile phone.
IOS/siri Active:
long touch the either of earphone for 2 seconds to activate Siri, Siri will be ready to take commands after a sound “Siri”
played through. (This function is only supported for IOS system devices).
Use earphones again:
Take the L/R earphones out of the charging box and the L/R earphones will power on and connect to each other
automatically. Then they will connect the bluetooth device automatically. (The last connected bluetooth device.)
Use a single earphone:
Only take out any one earphone, the White light of this one will flash soon. Then double click it, the indicator is changed to
blue & white light flickering. While turn on the cellphone, search the bluetooth “P10” and connect. Left and right earphone
can be used separately.
Tips: 1) If the master earphone (left earphone) is being used as single earphone and want to change TWS mode, you only
need to pick up the other earphone from the charging box. These two earphone will connect each other automatically.
2) If the slave earphone(right earphone) is being used as single earphone and want to change TWS mode, you need pick up
the other earphone, touch it for 3 seconds and then release. This earphone will power on and will automatically connect
with the master (left earphone).
After the connection is successful, the master earphone will have the voice prompt “second device connected, left
channel” and the slave earphone voice prompt “right channel”.
Functional operation:
Phone ring tone and sound can be heard from Both earphones.
Answer the phone: when calls come in, single-click either of earphones. (Sounds can be heard from both earphones.)
Hang up the phone: during the call, single-click either of earphones.
Reject a call: when calls come in, long touch the either of earphones for 2 seconds.
Music play: In playing music, double-click the master earphone (left earphone) for previous track; double-click the slave
earphone (right earphone) for next track; single-click the either of earphones for pause or play music.
Decrease the volume(-): Long touch the master earphone (left earphone) over 3 seconds to turn the
volume down.
Increase the volume(+): Long touch the slave earphone (right earphone) over 3 seconds to turn the volume
up.