User's Manual

4
Pairing
With Phone
When the “T12PRO ”is power off ,hold down the
“center key” for 5 seconds.after “T12PRO”the paring
state,the red and blue lights flashing alternately .
turn on the bluetooth of the mobile phone ,search
for new devices,and select the connection when
“T12PRO”is found.
TYPE OPERATION BUTTON COMMANDS
Mesh interphone enabled
Mesh interphone closed
Volume Up
Volume Down
Reset the MESH Intercom
press for
8 seconds
While Mesh intercom mode on ,“T12PRO”will autom
atically connect to nearby “T12PRO” users and allow
them to support up to 32 rider onlino at the same time
through open intercom free conversation.
When the headset Mesh is reset,it clears all network
ing informationand automatically returns to the default
channel 4.
MESH
Intercom
T120
PRO
Moblle Phone Pairing
press for
5 seconds
short press
once
short press
once
short press
once
short press
once