User's Manual

Add Device-AP mode
In the main application page,click on the top right corner ”+” to next window
page and then choose Lighting,as shown below.
In normal mode, click on the top right corner ”AP Mode” to AP Mode window
page.
In AP Mode,please confirm that the device red light is slowly blink and then
into the next step.
Note:
If the light in quickly blink,just press the controller with 5-10 seconds
again,and the red light will slowly blink.
If the light neither slowly blink nor quickly blink.First press the “mode” key of
the controller with 5-10 seconds to keep the red light in the quickly
blink ,Second release the button and then press the controller with 5-10
seconds again,the red light will slowly blink.