User's Manual

第 -
6
- 页 共 10 页
and click the connection to use the pairing mode. (At this time, 2
headphones blue light flashes slowly, blinking once every 3
seconds)
Single ear mode:
First open the top cover of the charging box, then pick up one of the
headphones, then the headset will automatically turn on (there is a
power-on tone), after about 5 seconds, the red and blue lights flash
alternately, then open the Bluetooth device of the mobile phone
and search for the pairing name "A5". Click on the connection to use
the single ear mode; (At this time, the headset blue light flashes
slowly, blinking once every 3 seconds)
Play / Pause / Cut song (up and down) / Volume up and down
(1) Play/Pause.When the headset is in the pairing state, after
connecting with the mobile phone, select that you need to start the
APP playback software. At this time, if you tap the main ear or the
secondary ear to open the key, the music will start playing; once
again, tap the main ear or the secondary ear to open the key. A
moment, the music is paused. (In the single ear mode, operate in
the same way)
(2) Cut song (up and down). When the headset is in the pairing
state, after connecting with the mobile phone, during the process of