User's Manual

Step 2Make sure the receiver is shut down first, and hold on
the on/off button for 7 seconds. The green light will
flash quickly and enter to the matching state after
hearing a beep.
Step 3Please press the tone or vibration function button
within 10 seconds when entering the matching state, and the
receiver will beep twice indicating that the matching is
successful.
Note
1.Repeat above steps when timeout
2.One channel can control multiple receivers simultaneously
The green light flashes quickly and
will enters the matching state after
hearing a beep.
Press the tone or vibration
function button within 10 seconds.
10