User's Manual

into the eyes.
4. Children should use it under adult supervision.
5. This product is not waterproof, so please avoid contact with water and DO NOT use it in a
humid environment.
INTRODUCTION
The Aurora starry projector light is a combination of LED and laser projection on the ceiling,
simulating the cosmic Milky River. This product has a built-in microphone that can identify
sound or music so that the light effect can show rhythm effect with the change of sound/music. It
can be used as a night light, atmosphere light, party light, sea wave environment lighting for
meditation, game room decoration lamp, starlight dinner, etc.
How to use:
1. Connecting to Power Supply: Connect the product to electricity with an adapter at 5V /
2000mA or above.
2. Power on: Switch to ON or OFF
3. Relaxation mode, use for sleep: The starry sky projection lamp is set to the default setting -
Sleep mode every time it is turned on. In this mode, the white noise is turned on, the moonlight
is always on, the laser breathes, and the green aurora runs at a slow speed.
4. Select Light Effect Mode: Aim the remote control at the IR remote receiving area of the
product and set it through the remote control. (see the next step for details)
5. Voice Control Rhythm Mode: Aim the remote control at the IR remote receiving area of the
product, and set it through the "microphone" button.
6. Connect Bluetooth to play music: Open the Bluetooth of mobile phone, enter the Bluetooth
setting interface, find and click “WD001”. Play music after connection.
7. Timing: Aim the remote control at the IR remote receiving area of the product, andset it
through the "1H""2H" button.
ManuaI buttons description: