User's Manual

ManualsBrandsShenzhen Weiyan Technology ManualsElectronicsStarry sky lights

Aurora Starry Projector light

USER MANUAL

Unboxing check :

Thank you for purchasing our products, please read the instruction manudl carefully before use.

Instruction manual contains necessary safety advice and user instructions, follow the instruction

manual to operate in order to avoid damaging the product for misuse. Check whether the

product is damaged or not when you receive the product.

CUSTOMER SUPPORT:

If you have any problems, we will try our best to solve your issues so that you don't need to

return it, please contact us via email.

Your emails will be answered within 24 hours on workdays, your satisfaction is our priority.

•Contact email address: absuper_service@hotmail.com

Statement: This product has been comprehensive and rigorous tested at the factory,the user

should strictly follow the warning and instructions. Improper use resulting in product damage is

not covered by the Company’s warranty.

Package list:

• Aurora Starry Projector light x 1

• Remote controller x 1

• Type-C usb cable x 1

• User manual x 1

Specificantion:

• Maximum LED Power : 4*3W

• Green Laser : ＜1MW

• Power Input : Type-C DC 5V/2A

• Operating temperature: 14°F ~ 104°F (-10°C ~ 40°C)

• Projection Coverage: 161 ~ 538 ft²(15 ~ 50 ㎡)

• Product Size: 13.7x11x10.5cm

Note: The power requirement of this product is USB DC 5V/2A, please make sure that the power

supply meets the standard. DO NOT connect usb to a computer or other low-power power supply

devices, which will cause the device to not work normally and shorten the service life of the

device.

Warning

1. Please operate the projector light according to the instructions and DO NOT disassemble it,

unauthorized disassembly will void the warranty.

2. This product is designed for indoor use.

3. This product is composed of LED and laser projection. Please do not shoot the laser directly

Summary of content (5 pages)

PAGE 1
Aurora Starry Projector light USER MANUAL Unboxing check : Thank you for purchasing our products, please read the instruction manudl carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
PAGE 2
into the eyes. 4. Children should use it under adult supervision. 5. This product is not waterproof, so please avoid contact with water and DO NOT use it in a humid environment. INTRODUCTION The Aurora starry projector light is a combination of LED and laser projection on the ceiling, simulating the cosmic Milky River. This product has a built-in microphone that can identify sound or music so that the light effect can show rhythm effect with the change of sound/music.
PAGE 3
1. Music: Click for next song / Long press for 3 seconds to switch between bluetooth model and white noise model. 2. MOON LIGHT: Click to turn on the breathing gradient effect of the moonlight, and click again to fix the moon light. / Long press for 3s to turn on or off moonlight. 3. LASER : Click to fix or turn on the breathing gradient effect of the laser. / Long press for 3s to turn on/off laser. 4. Aurora LED: Click to chang led color / Long press for 3s to turn on/off the aurora led. 5.
PAGE 4
Remote controI function instruction: 1. Moonlight Control Button: press to turn on/off the Moonlight effect 2. Laser Control Button: press to turn on/off the starlight effect 3. Red Light Button: press to turn the nebula into the green 4. Green Light Button: press to turn on/off green light 5. Blue Light Button: press to turn on/off blue light 6. White Light Button: press to turn on/off white light 7. Previous song 8. Next song 9.
PAGE 5
11. Sleep Mode: clikc it when you sleep 12. Speed Up Button: speed up the Aurora (slow/medium/fast). 13. Speed Down Button: speed down the Aurora (slow/medium/ fast). 14. Aurora LED Control Button: press to turn on/off the Aurora effect 15. Brightness Adjust Button: press to adjust the brightness(3 levels in total). 16. Mode Switch Button: Switch between different aurora modes: (1) Monochrome change mode: red-green-blue-white change in order.