User's Manual

SHENZHEN WEIKING TECHNOLOGY CO.,LTD
BT48S User Manual
______________________________________________________________________________________________
版本: 1.0
页次: 4
will remember the former pairing device, and no need to pair again in the next
time, the speaker will connect with the former device automatically (noted：
Bluetooth device should connect with the speaker in ten minutes, or the speaker
will turn off automatically)
4.1.3 When connect successfully, you can select songs.
4.2 External audio function:
Plug the 3.5mm audio cable into audio port under power on status, the speaker
will switch to external audio input mode, and the red LED turns on all the time ,
it can play the audio from the device directly.
4.3 Buttons function
4.3.1
ON/OFF switch, Long press to turn on/ off the speaker
4.3.2
play/pause/mode change，short press to play/pause, long press
to change the modes.
4.3.3 : select songs under Bluetooth mode, short press to select
songs:
: next songs， : previous songs
long press to adjust volume: volume up， volume down。
4.4 Note: Please switch off the speaker if don’t use, to prevent power loss
4.5 Introduction of Indicator Light：
4.5.1 Bluetooth mode: Under pairing mode, the blue LED flashes rapidly；
Under paired mode, the blue LED flashes slowly.
4.5.2 External audio input mode: the LED turns red；
4.5.3 Powering Off: the red LED flashes slowly。
5. Working conditions:
Temperature: 0º C ~ 40º C
Humidity: 0% ~ 85% RH