User's Manual

4.2 CONNECTION PRIORITY
Incoming and outgoing calls will always take precedence over audio playback. Audio content via 3.5mm
stereo input will override wireless audio via Bluetooth.
5. GET TALKING
Your BT26S can be used as a wireless speakerphone. Just speak in the direction of the front grill. The
built-in microphone only works when connected via Bluetooth®.
5.1 ANSWER/END A CALL
Press the PHONE CALL BUTTON on yourBT26S Speaker to both answer and end a call.
5.2 DECLINE AN INCOMING CALL
Press and Hold the PHONE CALL BUTTON for 2 seconds.
5.3 MAKE A CALL
Use your phone to dial as usual. Listen and talk through your BT26S Speaker.
TROUBLESHOOTING
1. HEARING DISTORTION
A. Lower the volume on your BT26S Speaker
and/or phone/device. (See section 4.1 GET THE BEST
SOUND)
B. Make sure it’s charged. Check for low battery, then chargeBT26S Speaker via USB.
2. NOT LOUD ENOUGH?
A. Turn up the volume on your phone/device or your bt26s Speaker.
B. Make sure it’s charged up.
3. UNABLE TO PAIR WITH BLUETOOTH® DEVICE?
A. Confirm that your phone/device is Bluetooth compatible.
B. Follow Section 4.1 GET CONNECTED instructions in this guide.
4. EXPERIENCING SIGNAL LOSS OR DROPOUTS VIA BLUETOOTH?
A. MoveBT26S Speaker closer to your phone/device.
B. Make sure it’s charged up.
C. Turn off yourBT26S Speaker and phone/device, then power up and reconnect.
SPECIFICATIONS
Bluetooth: 4.0+EDR
Bluetooth Profile: A2DP, AVRCP
3.5mm Aux-in
Speaker Diameter: 40mm
Power Output: 4W x 2
Frequency Response: 160Hz - 20KHz
Built-in Microphone
Size:182*68mm
BATTERY & POWER
Battery:4000mah
Music Streaming Time: up to 8 hours
Charging Time: up to 6 hours
Bluetooth Transmission Distance:10m
A
udio Power Out
p
ut: 4W x 2
A
udio Fre
q
uenc
y
Res
p
onse: 160Hz - 20KHz