User's Manual



1. Switch ON/OFF SWITCH to ON.
2. Wait for the LED light to flash BLUE.
You will hear a quick “To” tone and it is ready to pair.
3.3 PREPARE YOUR PHONE OR DEVICE
Turn on Bluetooth®.
ON AN IPHONE®, IPOD®, OR IPAD®
Go to SETTINGS > enable BLUETOOTH
ON ANDROID®,
Go to SETTINGS > enable BLUETOOTH
ON A BLACKBERRY®
Go to SETTINGS/OPTIONS >BLUETOOTH and enable BLUETOOTH
3.4 MAKE THE CONNECTION
Go to your device’s Bluetooth® settings.
ADD, SEARCH or SCAN FOR DEVICES
When “BT speakers” appears, select it.
When pairing is successful, you will hear a “To To” tone and the LED light will illuminate BLUE.
This is a one-time event per device. To pair your BT26S Speaker to another device, repeat steps 3.2 to
3.4.
3.5 PLUG & PLAY
Your Bluetooth bt26s Speaker also connects via 3.5mm stereo input.
Play audio from any device with a 3.5mm audio jack or audio output.
When BT26S Speaker connects via 3.5mm stereo input, the speaker’s control panel functions, such as
MUSIC PLAY/ PAUSE, VOLUME & TRACK CONTROLS, will not work. These functions can only be
controlled from your audio source.
4 .GET LISTENING
4.1 GET THE BEST SOUND
For best listening results, make sure your BT26S Speaker is resting on its base and speaker grill facing
towards you.
When connected wirelessly via Bluetooth®, it’s best to maximize the volume on your phone/device and
then use the BT26S Speaker.
When connected via 3.5mm stereo input, your phone/device may distort the audio signal if turned up too
loud.