User's Manual

Slide the ON/OFF switch to POWER ON the device until the power indicator lights up in green to turn on
BT26S
VOLUME CONTROLS
Press and Hold the PLUS “+” and MINUS “-“ buttons to Increase and Decrease volume.
MUSIC PLAY/ MUSIC PAUSE BUTTON
Use this button to control music play or pause.
CALL PICK UP/END BUTTON
Use this button to answer or end a call.
Press and Hold this button to make last call.
1. IMPORTANT SAFETY NOTE
- Read, follow, and keep these instructions.
- Pay attention to all warnings.
- Do not use this device near water.
- Clean only with a soft, dry cloth.
- Do not block ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including amplifies) which produce heat.
WARNING:
To reduce the risk of fire or electrical shock, do not expose this device to rain or moisture.
- Protect the charging cables from being walked on or pinched, particularly at the plugs and the point
where it exits from the device.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this device during lightning storms or when unused for long periods of time.
- Do not expose this device to dripping or splashing and ensure that no objects filled with liquids, such as
vases, are placed on the device.
WARNING:
No open flame sources -such as candles- should be placed on the product.
2. POWER UP
For best results, fully charge your BT26S Speaker before use.
FOR A FULL CHARGE
Plug BT26S Speaker into your wall charger or computer via micro USB cable.
WHEN BATTERY IS LOW
The LED light flashes RED.
WHEN BATTERY IS CHARGING
The LED light will illuminate RED in color.
WHEN FULLY CHARGED
The LED light will turn OFF.
NOTE:
A full charge takes up to 6 hours.