User's Manual

AUX audio-in connector:
The speaker also features AUX audio in port, simply connect the speaker with your non-Bluetooth
mobile phone/MP3 player/PC/laptop with the 3.5' jack audio cable. the green and blue led will be
on ,then you can play music via wired connection
Low power indication: Speaker will have voice hint to remind you to charge if battery is
low( battery only left 10%). User need to charge the speaker timely.
Accessories:
1. Micro USB Cable ( for charging )
2. 3.5mm Audio cable ( AUX-in cable )
3. User Manual
Charging and computer connection :
Connect the micro USB charging cable to a computer or USB charger, red Led indication for
charging status.
Red LED goes off upon charging finished. (2~3 hours for charging time.)
Speaker Interfaces:
Audio input connector: 3.5mm
AUX cable : support aux external audio input.
Charging interface: Micro USB
Dimensions And Basic Parameters:
DIAMETER: 81.6 ± 0.2mm *WIDTH:52.0 ± 0.2mm* HEIGHT: 56.6 ± 0.2mm
Material: ABS plastic
Weight: 136g ± 5g
Electrical Specifications:
Compatibility:
Transmission distance: 10 m (transmission distance may different according to environmental
factors and other device's functional range)
signal to noise ratio S / N:  80dB
Frequency Range: 180Hz-20KHz
Distortion THD:  1%
speaker unit: outer diameter 36mm, inner magnet, 4 ohms, 2W
Battery: built-in lithium battery, 3.7V/200mA
Charge voltage: 5V ± 0.25V
Charging time: 2~3 hours
Sound Response: 180Hz-20KHz
Speaker unit: outer diameter 36mm, inner magnet, 4 ohms, Speaker power ：2W