User's Manual

ManualsBrandsSHENZHEN WEIKING TECHNOLOGY ManualsAudio EquipmentBluetooth Speaker

Bluetoothspeaker

BT106

UserGuide

Accessories:

1. MicroUSBCable(forcharging)

2. 3.5mmAudiocable(AUX‐incable)

3. UserManual



BluetoothConnection:

Turnthespeakeronbylongpressthepowerswitchfor2‐3seconds.TheBlueLEDlightflashes

quickly,thenblueledflashquickly.ThespeakernowhasenteredtheBluetoothpairingmode.

1. Activateyourphone'sBluetooth

2. Gotoyourphone'sBluetoothsettings,scanfornewBluetoothdevices

3. Upondevicefound(BT106),clickthedevicenameandpairwithit

4. Ifyourphoneask

forpairingcode,pleaseenter”0000”andconfirm

5.Aftersuccessfulpairing,yourspeakerwillsoundaprompttoneandtheLED

lightsblue.

Note:Pairingtimeisvariedwithdifferentmobilephones.Itonlyneedtopairatthefirsttimeand

itwillautoconnectthedevices

whichalreadypairedbefore(Speakeronlycanrememberthelast

8paringdevicesname)



AUX‐INfunction

The speaker also features one AUX audio in port, simply connect the speaker with your

non‐bluetooth mobile phone/MP3 player/PC/laptop with the 3.5' jack audio cable.green led

lightwillbeon,thenyou

canplaymusicviawiredconnection



Chargingandcomputerconnection:

ConnectthemicroUSBchargingcabletoacomputerorUSBcharger,redLedindication

forchargingstatus.

RedLEDgoesoffuponchargingfinished.(5‐6hoursforchargingtime.)

Lowpowerindication:Speakerwillhave GreenLED light and voicehintremind you to chargeif

batteryislow(batteryonlyleft10%).Userneedtochargethespeakertimely.



Specifications:



ThemeetBluetooth3.0ClassII,meetA2DPV1.2,AVRCPV1.4profilesagreement.

Transmission distance: up to 10 m

 (transmission distance may different according to 

environmentalfactorsandotherdevice'sfunctionalrange)

Maximumoutputpower:5W

Size：155*54*129mm

Summary of content (4 pages)

PAGE 1
Bluetooth speaker BT106 User Guide Accessories: 1. Micro USB Cable ( for charging ) 2. 3.5mm Audio cable ( AUX‐in cable ) 3. User Manual Bluetooth Connection: Turn the speaker on by long press the power switch for 2‐3 seconds . The Blue LED light flashes quickly ,then blue led flash quickly. The speaker now has entered the Bluetooth pairing mode. 1. Activate your phone's Bluetooth 2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices 3.
PAGE 2
signal to noise ratio S / N: ≥ 80dB Frequency Range: 160Hz‐20KHz Distortion THD: ≤ 1% speaker unit: outer diameter52 mm, inner magnet, 4 ohms, 6W Rated voltage: 3.7V DC Battery: built‐in lithium battery, 3.7V/2000mA Charge voltage/Current: 5V ± 0.25V . 1A Charging time: 5‐6 hours Hands free , volume, skip tracks operations : 1) Long press 2‐3 seconds for Power on/off 2) hands free ：During an incoming call, short press to answer the phone, short press again hand up phone and back to play music .
PAGE 3
4) Play/pause:short press for play /pause. 5) Short press for Volume up/long press for Next song 6) Micro USB for charging 7) Aux‐in jack 8) Disconnected :long press the “+” and “‐“ together for 3‐4 seconds Note : 1. Under Bluetooth mode when the 3.5mm audio plug is inserted in, the speaker will switch to line in status automatically; 2. Please switch off the speaker if don’t use to prevent power loss LED status: 1.Bluetooth status: blue light flashing for pairing. Blue light keep on for connection status.
PAGE 4
buttons on the speaker; b) This feature needs the Bluetooth devices paired with the speaker to support AVRCP (Audio/Video Remote Control Profile). Please make sure your cell phone or other Bluetooth device supports AVRCP. Safety Notices: Read the following recommendations before using the bluetooth speaker. a) Keep it dry and don’t take it to damp places to avoid the product’s internal circuit being affected. b) Keep the product away from direct sunlight or hot places.