User's Manual

3 GPS Device Menus
Tap to enable navigation. If the device does not boot up please check the path is correct in NaviConfig. Pathe
should be \ResidentFlash|NAVI\Navi.exe or possibly \ResidentFlash|NAVI\Navi\Navi.exe
FM emission function can send your satellite navigator sound to car audio. Method:
1. Connect your satellite navigator with car charger.
2. Adjust the car FM frequency to a frequency without the radio.
3. Tick √ “Use FM”, adjust the same frequency as the car’s, tap to complete pairing setting.
If you do not use FM in the GPS device, do not tick FM. Otherwise, the device will be mute.
Use the GPS navigator outdoors.
Successful positioning requires at least 3 channels to turn green, for a total of 12 channels.
After successful positioning, the right part will show the signal is valid.
If positioning fail, please check if the default location is made in navigation. Method: Navigation->Destination-
>Find address, enter an address around your location.