Quick Start Guide

Fast Charger
Adopting an aluminium alloy diecasting , the Fast
Charger has an input voltage of 90-260 V, output
voltage of 58.6-59 V, charging current of 16-18 A, and
a protection level of IPX6.
1. Integrated Line 2. Power Cord
3. Indicator Light
Battery
Status Indicators
100%25%
Fault Indicator
Output Indicator
Waydoo Flyer ONE Quick Start Guide Waydoo Flyer ONE Quick Start Guide
ENEN
1. Bluetooth Button
2. Battery Status Display
3. Rotary Lock
4. Power Button
5. Integrated Port
Short press “+” and “-” simultaneously when the Jet
ONE Controller is powered on to enter Settings.
Scroll through the menu by pressing the “+” or “-” and
press the Power Button to conrm.
After entering the sub-menu, use "+" or "-" to scroll
and press the Power Button to select the Mode. Press
"+" or "-" to switch and press the Power Button to
conrm. The highest gear can be adjusted in speed
limit mode.
Finally press “+” or “-“ to scroll to the return option, and
press the Power Button to conrm until you exit the
Settings. Refer to the Units and change operation as
follows:
For languages, refer to the Language and change
operation work as the following mode operation.
Switching Working Mode:
Normal Mode
PowerFlight Cell Charging Status Description
The PowerFlight Cell can be embedded in the board
and has an average battery life of 55-85 minutes. The
battery has a capacity of 32500mAh and the voltage is
14S/58.8V. Additionally, the built-in AL system tracks
the battery status, allowing for a safer user experience.
(Front) (Back)
5
1
2
3
4
Units
Units
return
kph
Units
Units
return
mph
5 6
All rights reserved by WaydooAll rights reserved by Waydoo
Speed Limit Mode
Mode
speed limit
return
off
Mode
speed limit
top gear
return
on
24
1
2
3
LED Status
Steady blue light Standby
Flashing blue light
Connecting
Charging
Fully charged
Flashing green light
Full green light
1. Connect the charger’ s integrated line to the battery
integrated port.
2. The charger power indicator shows a steady blue
light indicating standby mode; then short press the
linking switch on the smart battery, and the indicator
will change from a steady blue light to a ashing blue
light, waiting for communication; then the ashing
blue light turns to ashing green, indicating that it
enters the charging mode.
Note: Fully charge the PowerFlight Cell when using for
the rst time. Make sure to use the standard charger.
Menu
Mode
Units
Language
return
Language
Language
return
EN
语言切换
语言切换
返回
中文
Menu
Mode
Units
Language
return
Menu
Mode
Units
Language
return
Charge the PowerFlight Cell