Use Instruction

Instruction manual
① ② ③ ④ ⑤ ⑥
❶ Power display
❸ USB Output port
❷ USB Input port
Power on
Power off
Answer/End a call
Reject a call
Previous
Next
Volume down
Volume up
Wake up voice assistant
Long press MFB for appr.2s
Pause the music, then long press MFB for 3 seconds
Single tap MFB
Long press MFB for 2s
Double tap L's MFB
Double tap R's MFB
Long press L's MFB
Long press R's MFB
Triple tap MFB
BT Version
BT Profile
Frequency Range
Transmission Range
Battery type
Music Time
Talking Time
Standby Time
V5.0
HSP/HFP/A2DP/AVRCP/AVDTP/AVCTP/GAVDP/
SPP/GATT
2.402-2.480GHz
About 33ft/10m （barrier-free）
Earphones:50mAh*2 Charging box:10000mAh
About 4-4.5H (60% volume)
About 4-4.5H
About 100H
When the earphone prompt"battery low" ，please put the earphones into the charging
box to charge.
When the charging box run out of battery, please use the standard charger to charge it.
For the first time use
Instruction for use
Instruction for use
Play/Pause Single tap MFB
Function
Function
Technische spezifikationen
Charging
❺ MFB
❹ Earbud's Indicator
When the earphones are manufactured, we will put insulation glue on the two contact points
of the earphones to avoid power consumption during transportation. For the first time use,
please remove the insulation glue and put it into the charging box. When you take out the
earphones from charging box again, the earphones will turn on automatically. Then you can
search the pairing name "T08P" on the phone to connect.
Insulation Glue
The earphones can be automatically power on and paired when they are taken out of the
charging box .
At this time, activate the mobile phone Bluetooth to search #T08P#
Take earphones out from the charging case, and long press both MFB for 3 seconds until
red light on to power off the earphones.Then,long press both MFB simultaneously for 8
seconds to reboot the earphones.
(Voice prompt:PTP Pairing)
Please put the earphones into the charging box, fully charge them before first use.
TWS earphones Using
If the earphones cannot pair each other:
Attention
The earphones will automatically connect to the last paired device when reboot.
It may need to connect manually if the earphones haven't been used for a long time.
Automatic connection
Pairing time out of 5 minutes, it will power off automatically.
Automatic power off
Red light on when charging, blue light on for 5 seconds when fully charged, then the light
turns off.
Charging time:appr.1.5H
Charge for the earphones:
When charging, the charging case displays its power by percentage at the ime. When fully
charged, it displays "100"
Charging time:appr.6H
Charge for the charging box:
❶ Before charging,it is best to turn off the earphone for safety.
❷ Make sure the earphone is fully charged before first using.
❸ Make sure every charging is fully charged, since repeated undercharging of the
earphone will cause the degradation of the battery performance.
❹ If the earphone has not been used for a long time,please recharge it before using.
❶ Please keep or use it under normal temperature.
The earphone comes with built-in non-removable,rechargeable Li-ion battery,please don’t
try to remove the battery from the earphones to avoid danger and damage.
❷ Do not throw it away casually or put it into fire to avoid danger.
❸ Do not disassemble,repair or modify it by yourself.
❹ Do not use harsh chemicals or strong detergents to clean he earphone.
❺ Do not use the earphone during a thunderstorm.It may cause the its irregular work and
increase the risk of electric shock .
Notes:
The earphone can be automatically power on when it is taken out of the charging box.
At this time, activate the mobile phone Bluetooth to search #T08P#.
Single earphone using
Turn the earphones on and off manually：
When you turn off the earphones manually by pressing the MFB button 3 seconds and
see the red light is on for 2 seconds, then you can long press the MFB button for about 2
seconds to power on the earphones again, and activate the mobile phone Bluetooth
search #T08P#.
Notes:
OUTPUT 5V 2.1A
INPUT 5V 2A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference
(2)This device must accept any interference received, including interference that may cause
undesired operation.