User's Manual

Call Waiting
When a call is active and a second cal comes through, a call alert will be heard (usually just few beeps).
Press and Hold the Multi-Function Button.
The Call ID Display shows the phone number of the incoming call.
The first call will be on hold and you can talk to the second caller.
Hold on the Multi-Function Button to switch the two call
To terminate one of the two calls, select the caller and Press the Multi-Function Button once only.
Last Number Redial
To Redial the last dialed number press twice quickly the Multi-Function Button, The
Caller ID shows [REDIRL]
Earpiece ——FM Transmitter
To begin a conversation with the Earpiece
1． . Remove the earpiece from the unit.
2． Turn it ON, the red LED will come on
3. Place the earpieces’s speaker in your ear.
The Caller ID shows [EAR].
4. Turn the Earpiece OFF to save battery power.
Note:
The data and the frequency received by the Car Kit control the echo and noise by the FM1182 DSP.
Then enlarge and output to the speaker by the EUP 4890 or transmit to the FM MODUTE(107.9 MHz) and
receive modulate and enlarge by the earpiece(107.9 MHz) .
Dialing from your Cell Phone
While paired with your Bluetooth Car Kit, you can make and receive calls directly from your cell phone
with Bluetooth function.
Switching Calls between your Bluetooth Car Kit and the Cell Phone Handset
The functions of access and delete your call phone’s number
1. To access your cell phone numbers.(the name must be English).
2. Select“Sent Name Card”,and send it by Bluetooth.
3. Select“HF88B”in the searched device, the cell phone will display sending successfully.
4. Access successfully.Saved english name will display on the mirror when call coming
5. Delete all numbers: press“TALK”button for eight seconds, you can delete all
Numbers you’ve accessed . Access successfully will display“Delete All”.
6. Delete some of the numbers: search numbers which you want to delete in the phone book, press